Even though the winters in Viera, FL, are usually quite mild, the majority of homes still rely on a furnace to stay warm. Furnaces typically have a maximum lifespan of around 15 years, but they sometimes won’t even last ten years if not well taken care of. With that in mind, here are six simple tips that can help to extend the lifespan of your furnace and ensure that you get the most out of it.
1. Schedule a Yearly Furnace Tune-Up
Scheduling an annual heating tune-up is by far the best thing you can do for your furnace and your entire HVAC system. Without regular maintenance, your heating system can quickly start to experience more issues and need more frequent repairs. A tune-up includes a full inspection and cleaning of your entire heating system to ensure it is free of any issues and functioning at its peak effectiveness and efficiency.
2. Replace Your Air Filter Regularly
Your air filter works to prevent dust, dirt, hair, and other airborne particles from getting inside your HVAC system. If you don’t replace the filter regularly, these particles can cause major damage to your furnace. A dirty filter also restricts air circulation and will cause your furnace to work harder and run more frequently.
To prevent these issues, you should always inspect your furnace at least once a month and replace the filter whenever it begins to look too dirty. The general rule of thumb is that you should replace or wash your filter once every two to three months or potentially every month if it gets dirty quickly.
3. Make Sure Your Ductwork Is in Good Shape
Ductwork leaks are one of the biggest sources of energy waste. If your ducts are damaged or not fully sealed, they will allow much of the hot air from your furnace to escape. This will increase the load on your furnace and make it run much longer to heat your home effectively.
For these reasons, we recommend that you have your ductwork inspected regularly. Ductwork resealing can eliminate any air leaks to lighten the load on your furnace and improve its effectiveness.
4. Upgrade Your Thermostat
If your home still uses an old manual thermostat, you should consider upgrading to a programmable or smart thermostat. Leaving your heating system turned on all day when you’re not home is a huge waste of energy and leads to increased wear and tear on your furnace. Programmable or smart Wi-Fi thermostats eliminate these issues by allowing you to set specific times for your heating to turn on and off so that it doesn’t need to run all day long.
5. Don’t Put Off Repairs
While annual furnace maintenance should help prevent most issues, problems can still arise at any time. This means that you should always monitor your furnace for any unusual noises or other signs that can indicate a problem. If you do notice anything unusual, you should always contact an HVAC professional immediately to prevent the problem from turning into something much more serious.
6. Use Your Ceiling Fans To Circulate Hot Air
Ceiling fans can be a tremendous help during the winter. If all of the hot air from your furnace stays near the ceiling, your heating system will need to run longer and more frequently. Setting your ceiling fans to run counterclockwise helps to prevent this by circulating the hot air throughout the room so that your furnace doesn’t need to work as hard to keep your home warm.
If you need any furnace repairs or other heating services in Viera, FL, you can count on the experts at Extreme Air and Electric, LLC We work on all makes and models of furnaces and heating systems, and we can also help with furnace installation. Call the team at Extreme Air and Electric, LLC to schedule any furnace service.
Image provided by iStock